Dairy Farm Training Schematic

Dairy Farm Training Schematic

Pen/ Group/ String Sampling via a QualiTru Fitting and peristaltic pump

Install on the “positive pressure” side of the milking system, after the Receiver and before the Balance tank. Can also be installed to diagnose possible system contamination from the cow to the Balance tank.

Learn about QualiTru products.

Pen Sampling SOP

Bulk Tank With or Without Agitation SOP

System Diagnostic

Isolate your system from the claw to after the balance tank to identify key segments of your system and verify the system CIP cycle. Can be used for trouble shooting quality and cleaning issues when installed in a series.

Learn about QualiTru products.

Diagnostic SOP

System Diagnostic

Isolate your system from the claw to after the sock Filters to identify key segments of your system and verify the system CIP cycle. Can be used for trouble shooting quality and cleaning issues when installed in a series.

Learn about QualiTru products.

Diagnostic SOP

Direct Load via QualiTru Fitting, Peristaltic Pump and refrigerator

Installed via a QualiTru Fitting, either Elbow or Straight, we recommend it be installed as close to the Chiller outlet as possible. Refrigerator and Peristaltic Pump should be located within 24 inches of QualiTru Fitting. Samples can be used for regulatory and quality samples. Can also be used for trouble shooting quality and cleaning issues when installed in a series.

Learn about QualiTru products.

FDA M-I-06-06     Direct Load SOP      Proper Bag Agitation

Peristaltic Pump

The peristaltic pump is the key to a controlled volume of milk that is sampled into the QualiTru Sterile Collection Bags. With the sampling system being a constant flow, you get a complete representative sample of all milk that flows by, for the purest regulatory and quality sample available on the market today.

Learn about QualiTru products.

FDA M-I-06-06

Line sampling

Install a QualiTru sanitary fitting at any point throughout your system as part of a diagnostic function, system quality check, CIP proficiency and overall Milk Quality Sampling.

Learn about QualiTru products.

Diagnostic SOP    

Line Sampling SOP

Dairy Farm Training pipes
Traditional Farm LoadingORDirect Load
to Truck
(click an option above)
Dairy Farm Traditional Farm Loading

Bulk Tank / Silo Sampling via a QualiTru recessed port or Tank fitting

Installed in the Door, or directly into the tank for regulatory and quality sampling

Learn about QualiTru products.

FDA MI-08-5    FDA M-I-06-12   

TruDraw Single Sampler SOP

Bulk Tank Sampling SOP

Bulk tank sample with or without agitation

Installed at the outlet valve of the bulk tank, samples to be taken via a peristaltic pump. Install QualiTru unload fitting at either the outlet valve of bulk tank or the inlet valve of the truck itself to take a representative sample of the milk being transferred to the truck, with or without the need to agitate the bulk tank or silo.

Learn about QualiTru products.

FDA M-I-12-4 

Bulk Tank With or Without Agitation SOP

Dairy Farm Direct Load to Truck

For Regulatory sampling side of the Tanker truck for Antibiotics

(PMO Appendix N) sampling at the processing plant via the Side sampler.

Learn about QualiTru products.

Side Mount Truck Sampler SOP

TruDraw Single Sampler SOP