Showing 1–16 of 18 results
-
Part No. 231010
The TruStream™ Drum Port is designed for the quick and safe extraction of samples from barrels, drums, and totes without exposing the product to airborne contaminants. It seamlessly replaces the standard NPS Bung Plug and is compatible with all TruStream7 Septa. This highly durable drum port can handle temperatures up to 190°F and is capable of withstanding pressures up to 30 psi and vacuum pressures down to -2.5 PSI. The fully contained sampling system prevents external contamination, ensuring the purity and quality of your product while meeting safety standards as it is FDA Food Contact Compliant, BPA Free, and Phthalate Free.
-
Part No. 211125, 211129, 211133 & 211137
The Tri-Clamp Port is designed to be tri-clamped in place, inline, or on a silo to allow quick access for process sampling. Available in 1.5″, 2″, 2.5″, and 3″.
-
Part No. 212113
The Tank Port is designed for taking aseptic samples off a silo. It can be welded onto a flat, non-insulated tank door.
-
Part No. 212123, 212127 & 212133
The Recessed Tank Port is designed for taking aseptic samples off a silo. It can be welded onto a flat or slightly curved insulated tank door.
-
Part No. 213019, 213025, 213029, 213033 & 213037
The Tri-Clamp Elbow Port replaces standard tri-clamp elbows to quickly take aseptic samples.
-
Part No. 213075, 213079, 213083 & 213087
The Butt Weld Elbow Port allows for permanent inline sampling by welding the elbow in place.
-
Part No. 215075, 215077, 215079 & 215085
The Butt Weld Tee Port allows for permanent inline sampling by welding the straight tee in place.
-
Part No. 215145 & 215147 & 215151
The Tri-Clamp Tee Port replaces a standard tri-clamp straight tee to quickly take aseptic samples.
-
Part No. 215515, 215520 & 215525
This Short Tee port replaces a short tri-clamp straight tee to quickly take aseptic samples.
-
Part No. 212533
The TS7 Adjustable Tanker Port with Security Lid is specifically designed for dairy and other liquid food tanker trucks. It welds onto the inner tank wall and the sliding telescopic sleeve design minimizes the need for additional retrofitting and fabrication. The port accommodates trailers with varying thicknesses of insulation (from ~4.3” to 6.0”). This port is ideal for sampling off the side or back of a tanker truck for accurate and safe antibiotic, component, or microbiological sampling.
-
Part No. 214500
The Inline Inspection Port is for use at VARIVENT® connection points.
-
Part No. 219021
This is used to secure the septum in place. It comes standard with all stainless steel ports but can be purchased separately to replace TS7 nuts. A TruStreem7 plastic dust cover can be used to protect the stainless steel port when not sampling.
-
Part No. 211164, 211168 & 211174
The Tri-Clamp Port is designed to be tri-clamped in place, inline, or on a silo to allow quick access for process sampling.
-
Part No. 212214
The Tank Port is designed for taking an aseptic sample off a silo. It can be welded onto a flat, non-insulated tank door.
-
Part No. 212224 & 212228
The Recessed Tank Port is designed for taking aseptic samples off a silo. It can be welded onto a flat or slightly curved insulated tank door.
-
Part No. 213124 & 213128
The Tri-Clamp Elbow Port replaces a standard tri-clamp elbow to quickly take aseptic samples.
