TS7 Ingold Port
Part No. 217105
The QualiTru Ingold Port revolutionizes bioreactor sampling and inoculation by eliminating the need for Steam in Place (SIP) between samples, increasing efficiency and minimizing risk in critical process applications.
TruStream7 Ports
QualiTru’s TruStream7 stainless steel sanitary ports are certified to 3-A Standard 63-04 and designed to work in a wide variety of locations, including processing lines, silos, tanks, and liquid tanker trucks. They provide easy, aseptic access to process monitor for microbial contamination, as well as line and tank sampling. Use with the QualiTru TruStream 7-Channel Septa.
Showing all 13 results
-
-
TS7 Tri-Clamp Port
Part No. 211125, 211129, 211133 & 211137The Tri-Clamp Port is designed to be tri-clamped in place, inline, or on a silo to allow quick access for process sampling. Available in 1.5″, 2″, 2.5″, and 3″.
Download Technical Spec Sheet >
Select options This product has multiple variants. The options may be chosen on the product page -
TS7 Tank Port
Part No. 212113The Tank Port is designed for taking aseptic samples off a silo. It can be welded onto a flat, non-insulated tank door.
Download Technical Spec Sheet >
View installation drawings >
-
TS7 Recessed Port
Part No. 212123, 212127 & 212133The Recessed Tank Port is designed for taking aseptic samples off a silo. It can be welded onto a flat or slightly curved insulated tank door.
Download Technical Spec Sheet >
View installation drawings >
Select options This product has multiple variants. The options may be chosen on the product page -
TS7 Tri-Clamp Elbow
Part No. 213019, 213025, 213029, 213033 & 213037The Tri-Clamp Elbow Port replaces standard tri-clamp elbows to quickly take aseptic samples.
Download Technical Spec Sheet >
Select options This product has multiple variants. The options may be chosen on the product page -
TS7 Butt Weld Elbow
Part No. 213075, 213079, 213083 & 213087The Butt Weld Elbow Port allows for permanent inline sampling by welding the elbow in place.
Select options This product has multiple variants. The options may be chosen on the product page -
TS7 Butt Weld Tee
Part No. 215075, 215077, 215079 & 215085The Butt Weld Tee Port allows for permanent inline sampling by welding the straight tee in place.
Download Technical Spec Sheet >
Select options This product has multiple variants. The options may be chosen on the product page -
TS7 Tri-Clamp Tee
Part No. 215145 & 215147 & 215151The Tri-Clamp Tee Port replaces a standard tri-clamp straight tee to quickly take aseptic samples.
Download Technical Spec Sheet >
Select options This product has multiple variants. The options may be chosen on the product page -
TS7 Tri-Clamp Short Tee
Part No. 215515, 215520 & 215525This Short Tee port replaces a short tri-clamp straight tee to quickly take aseptic samples.
Download Technical Spec Sheet >
Select options This product has multiple variants. The options may be chosen on the product page -
TS7 Adjustable Tanker Port with Security Lid
Part No. 212533The TS7 Adjustable Tanker Port with Security Lid is specifically designed for dairy and other liquid food tanker trucks. It welds onto the inner tank wall and the sliding telescopic sleeve design minimizes the need for additional retrofitting and fabrication. The port accommodates trailers with varying thicknesses of insulation (from ~4.3” to 6.0”). This port is ideal for sampling off the side or back of a tanker truck for accurate and safe antibiotic, component, or microbiological sampling.
Download Technical Spec Sheet
Download Information Sheet
Download Installation Guide
-
TS7 Inline Port (with VARIVENT® Connection)
Part No. 214500The Inline Inspection Port is for use at VARIVENT® connection points.
View brochure >
-
TS7 Replacement Nut
Part No. 219021This is used to secure the septum in place. It comes standard with all stainless steel ports but can be purchased separately to replace TS7 nuts. A TruStreem7 plastic dust cover can be used to protect the stainless steel port when not sampling.
-
TS7 Ingold Port Replacement Nut
Part No. 217301This is used to secure the septum in place in the TS7 Ingold Port. It comes standard with the TS7 Ingold port but can be purchased separately to replace the TS7 Ingold nut. A TruStreem7 plastic dust cover can be used to protect the stainless steel port when not sampling.
